Crafted from a single sheet of 100% carbon fiber, offering uniformity to the entire frame. The Lynx 6 was developed with HM (High Module T40, T30 and T24 of Toray) technology in order to offer increased rigidity.
Split Pivot Suspension
Floating shock mount
Independent Drive and Brake Links
Full-length internal routing
Pressfit 92 BB
142x12 Rear Axle
Dropper post with internal routing
Fox Kashima shock and fork
SPLIT PIVOT TECHNOLOGY
Split Pivot is a floating suspension system developed by BH based on traction, pedaling efficiency, handling, and enhancing the bicycle’s rigidity. This system allows for separate action on three forces produced on the bicycle: pedaling, braking and suspension. The result is maximum pedaling efficiency with consistent and progressive suspension. The advanced rear suspension of the Lynx allows it to have a greater range while being very lightweight.
INTERNAL CABLE GUIDING
The guiding system of cables and derailleurs is completely internal in the Lynx 6. It is also equipped with an internal guide in the adjustable seatpost. It incorporates the standard ISCG 05 integrated chain guide.
DIRECT MOUNT DERAILLEUR. EASY ADJUSTMENT, TOTAL PRECISION
The direct anchoring of the Direct Mount derailleur guarantees simple adjustment and maximum degrees of reliability and precision. Being fully integrated in the frame offers an increased rigidity and an absolute precision while shifting gears. It’s design simplifies its adjustment. The anchoring of the Direct Post Mount rear brake, including detachable screws, eases adjustment and increases braking reliability.
Lynx 6 Carbon
Black / Blue / Gray
Fox Factory Float 3 Position EVOL lever
Fox Factory 36 Float FIT w/HSC/LSC; 15mm axle
Easton HAVEN 35 (60mm/S, M; 70mm L)
FSA No.42 1.125-1.5"
SRAM XO trigger
SRAM XO 11
Race Face Turbine Cinch 32T (170mm/S; 175mm/M, L)
Race Face PF92
SRAM XG 1175 10-42T
Shimano XT Trail 203mm rotor
Shimano XT Trail 180mm rotor
Easton Heist 30, tubeless ready
Maxxis DHF 60TPI, 27.5x2.3"(front)/DHR 60TPI, 27.5x2.3" (rear)
Easton Heist 30mm; Tubeless ready
Easton X5 100x15mm/front; 142x12mm/rear
double butted w/brass nipples
Prologo Nago X10
BH 34.9 alloy
Kind Shock LEV Integra (125mm/S, M; 150mm/L) w/SOUTHPAW lever
Easton HAVEN 35 (750mm w/40mm rise)